PRO One Brazing Flux : Advantages

Home

PRO One Brazing Products

Advantages

Application

Contact

Better Quality & Better Results

The Advantages Are Simple

When developing the PRO One product, it became clear to Protechno's engineers that one of the critical factors to the product's success was the extent to which the brazing alloy overlapped the flux core.

There needed to be sufficient overlap to contain the flux, but too much overlap inhibited the flow of the flux as it melted. PRO One has been engineered to allow the flux to escape through the overlap along its entire length, not just from the ends.

It is this feature which sets PRO One apart from the competition. It allows a more consistent flux application around the joint and produces better quality parts with fewer rejects.

Initial testing suggests that flux-cored materials produce higher strength joints due to a dramatic reduction in flux inclusions. Flux inclusions are voids in the joint left by entrapped flux between the parts. PRO One cored materials reduce these voids because of the viscosity of the flux at brazing temperatures and because less flux is used.

Test Result: Void area is the best measure of joint integrity. Voids can cause low joint strength by reducing the load carrying area and they frequently provide a path for leakage. Our tests illustrate a dramatic reduction of voids compared to traditional methods. A reduction in voids will produce stronger and higher quality braze joints.

PRO One reduces overall metal-joining cost by lowering the time it takes for post braze cleaning and secondary finishing operations.

PRO One reduces flux exposure to plant equipment, waste water and personnel.

Download safety data sheets:

MSDS Argeco 108-109 general purpose filler metals

MSDS Argeco 2008-2067-2211 general purpose filler metals

MSDS FilAlu 1192NC general purpose filler metals

MSDS Filalu 9802NC aluminum filler alloy metal

The PRO One brazing process is simplified by eliminating a separate fluxing operation.

Access the 'How Is It Applied?' video

Please contact PROTECHNO for more information or to talk to a Technical Representative about the PRO One product that's right for you.

- PROTECHNO SA. -
- ZAE Les Chaumes - BP27 -
- 24600 RIBERAC -
mailto:protechno@protechnogasflux.com
(33) 05 53 92 53 00 phone
(33) 05 53 92 53 18 fax

To find out more about Protechno SA. go to www.protechnogasflux.com

PROTECHNO S.A. - ZAE Les Chaumes - BP27 - 24600 RIBERAC - FRANCE
http://www.protechnogasflux.com | mailto:protechno@protechnogasflux.com
phone (33) 05 53 92 53 00 | fax (33) 05 53 92 53 18